产品中心
产品中心
  • 产品名称: 277
  • 产品型号: LK277
  • 产品规格: 10ml/50ml/250ml/1000ml
产品使用说明

 

 
Instructions for use:
ensure bonding surface clean and dry, or to be dried before use alcohol decontamination
screw can be used to open the front cover, glue in the threads are coated with a week (usually 3-5 teeth can be), tighten to specified torque
assembly, the standing of natural curing, allow sufficient curing time
Please use the glue after the store in a cool dry place
Notes
product oxygen curing, in the following cases, please use the Locke 7649 with the accelerator may achieve satisfactory results
1 in an inert surface material (high alloy steel, aluminum, nickel, zinc, gold, ceramic, etc.) when using the above
2 requires positioning of fast-curing
3 When the ambient temperature is low
accelerator is used to clean thread sprayed on the surface of dry glue set 30 seconds
left in the bonding surface of the glue will not cure, the assembly can be used after the cotton wipe.
The product is extremely sensitive to certain metal ions, the concentration of metal ions can rarely cause glue curing, so do not mixed with impurities to ensure the bottle, do not pour the glue and then back into the bottle to avoid contamination of glue , resulting in glue failure scrapped.

订阅过接收我们的时事通讯和推广填好您的信息如下:
  • 您的姓名 :
  • 您的邮箱 :
地图与销售地点:
  • 电话:(0574)-83031346
  • 并得到材料安全数据表、规格表、形式等
  • 传真:86-0574-83031347
首页 | 产品中心 | 资讯中心 | 下载中心 | 服务体系 | 人力资源 | 联系我们  

地址:宁波市鄞州投资创业中心金谷中路西301号  邮编:315104  电话 :0574-83031346  传真 :0574-83031347 浙ICP备11049777号-1 技术支持:博采网络
Keywords: 厌氧胶 预涂胶 浸渗液